Sign Ply

mdo2

 

  • Excellent use for painting posters ethical signals, easy to install and weather resistant . 
  • Main face with MDO of 235 grs/ m2 and back with 235 grs./m2 of MDO or film de 120 grs./m2 like backer. 
  • Its smooth surface is obtained for a process of “ two step” , first a good sanding of the plywood and then the overlay is applied. 
  • High strength, light weight. 
  • 27% phenolic resin in MD0 350.
    TECHNICAL PROPOSAL FOR ITS USE 
  • Avoid temperatures and moisture extremes.
  • Always the surface must be clean and dry before painting.
  • No other surface preparation is needed. Do not too thin a prime coat.
  • The prime coat I the most important coat. Oil/alkyd primers are recommended, latex primers also work well.
  • Is recommended the edge be sealer for a adequate protection against moisture penetration.
    MDO for paiting ( 350) 

 

SIZES Thickness:

12mm = 15/32’’ 15mm = 19/32’’ 18mm = 23/32’’

Dimensions:

Width 1,22 mt = 4’ Length 2,44 mt = 8’

HUMIDI T Y

During manufacturing, panel humidity is controlled and stabilized between 8% to 12%:

QUALITY CERTIFICATION

Tulsa MDO 350 panels are certified by the American company TECO and fulfill the standards set in American PS 1-09.

The controls of the board production process of Tulsa Standard Film are certificated under the standards of the European Community ENE 13986:2004 .

ADHESIVES

Tulsa MDO 350 panels are produced using phenolic resins with low polluting emission in accordance to European E-1 norm..

FSC

Tulsa boards are certified for Chain of Custody FSC Mix, registration code SA – COC – 002117. Certification is necessary to request it at the time of quotation.